Items where Author is "Chrysanthou, A."
Number of items: 59.
Article
Porosity control of in situ forming tungsten carbide in laser additive manufacturing (LAM). (2020)
P. Sevcenko,
A. Chrysanthou,
C. Y. Kong
and
P. Nicolson
![]()
Glass-ceramic sealant for solid oxide fuel cells application: Characterization and performance in dual atmosphere. (2016)
A. G. Sabato,
G. Cempura,
D. Montinaro,
A. Chrysanthou,
M. Salvo,
E. Bernardo,
M. Secco
and
F. Smeacetto
![]()
Chord line force versus displacement for thin shallow arc pre-curved bimetallic strip. (2015)
G. D. Angel,
G. Haritos,
A. Chrysanthou
and
V. Voloshin
![]()
Correlation of dent depth to maximum contact force and damage of composite laminates. (2015)
Zeng Shen,
Yigeng Xu
and
A. Chrysanthou
![]()
Novel glass-ceramic composition as sealant for SOFCs. (2014)
Federico Smeacetto,
Auristela De Miranda,
A. Chrysanthou,
Enrico Bernardo,
Michele Secco,
Massimiliano Bindi,
Milena Salvo,
Antonio G. Sabato
and
Monica Ferraris
![]()
Contact behaviour of composite laminate under quasi-static indentation load. (2014)
Zeng Shen,
Yigeng Xu
and
A. Chrysanthou
![]()
Synthesis, luminescence and phase composition of samarium-doped zinc phosphate glass ceramics. (2013)
Z. Stoeva,
G. Patronov,
A. Chrysanthou,
D. Tonchev
and
S. Kasap
Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h. (2013)
F. Smeacetto,
M. Salvo,
A. Chrysanthou
and
T. Moskalewicz
Martensitic-Austenitic phase transformation of Ni-Ti SMAs : Thermal properties. (2012)
C. Zanotti,
P. Giuliani
and
A. Chrysanthou
Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs. (2011)
F. Smeacetto,
A. Chrysanthou,
M. Salvo,
T. Moskalewicz,
F. D'Herin Bytner,
L. C. Ajitdoss
and
M. Ferraris
Comparison between the thermal properties of fully dense and porous NiTi SMAs. (2010)
C. Zanotti,
P. Giuliani,
P. Bassani,
Z. Zhang
and
A. Chrysanthou
Correlation between the corrosion resistance and the hardness scattering of structural metals treated with a pulsed electric current. (2010)
Anatolii Babutskyi,
A. Chrysanthou,
John Ioannou
and
I. Mamuzic
Cast in situ Cu–TiC composites : synthesis by SHS route and characterization. (2009)
S. Rathod,
O.P. Modi,
B.K. Prasad,
A. Chrysanthou,
D. Vallauri,
V.K. Deshmukh
and
A.K. Shah
Effect of pulsed electric current treatment on corrosion of structural metals. (2009)
Anatolii Babutskyi,
A. Chrysanthou
and
J. Ioannou
Performance and testing of glass-ceramic sealant used to join anode-supported-electrolyte to Crofer22APU in planar solid oxide fuel cells. (2009)
F. Smeacetto,
A. Chrysanthou,
M. Salvo,
Z. Zhang
and
M. Ferraris
Thermal diffusivity of Ni–Ti SMAs. (2009)
C. Zanotti,
P. Giuliani,
G. Riva,
A. Tuissi
and
A. Chrysanthou
Characterization and performance of glass-ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs. (2008)
F. Smeacetto,
M. Salvo,
A. Ferraris,
V. Casalegno,
P. Asinari
and
A. Chrysanthou
Formation and microstructure of (Ti, V)C-reinforeed iron-matrix composites using self-propagating high-temperature synthesis. (2008)
A. Chrysanthou,
Om Prakash Modi,
Li Han,
Narayanrao Ramakrishnan
and
J.M. O'Sullivan
Evaluation of quality and behaviour of self-piercing riveted aluminium to high strength low alloy sheets with different surface coatings. (2008)
Li Han
and
A. Chrysanthou
TiC-TiB2 composites : A review of phase relationships, processing and properties. (2008)
D. Vallauri,
I. C. Atias Adrian
and
A. Chrysanthou
Erosive-corrosive wear behaviour of Fe-TiC and cobalt based layers separately deposited on En31 steel. (2007)
O. P. Modi,
B. K. Prasad,
A. Chrysanthou,
V. P. Deshmukh
and
A. K. Shah
High-stress abrasive wear response of 0.2% carbon dual phase steel : Effects of microstructural features and experimental conditions. (2007)
O. P. Modi,
Pallavi Pandit,
D. P. Mondal,
B. K. Prasad,
A. H. Yegneswaran
and
A. Chrysanthou
Mechanical behaviour of self-piercing riveted multi-layer joints under different specimen configurations. (2007)
L. Han,
A. Chrysanthou
and
K. W. Young
Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets. (2006)
L. Han,
A. Chrysanthou,
K. W. Young
and
J. M. O'Sullivan
Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions. (2006)
Li Han,
A. Chrysanthou
and
J.M. O'Sullivan
The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets. (2006)
Li Han,
K. W. Young,
A. Chrysanthou
and
J.M. O'Sullivan
An investigation of the self-propagating high-temperature synthesis of Ti(Si,Al). (2005)
A. Chrysanthou,
E.K. Opoku
and
L. Han
Combustion synthesis and subsequent sintering of titanium-matrix composites. (2003)
A. Chrysanthou,
Y.K. Chen,
A. Vijayan
and
J. O'Sullivan
Fretting wear in self-piercing riveted aluminium alloy sheet. (2003)
Y.K. Chen,
L. Han,
A. Chrysanthou
and
J.M. O'Sullivan
![]()
The effect of different metallic counterface materials and different surface treatments on the wear and friction of polyamide 66 and its composite in rolling-sliding contact. (2003)
Y.K. Chen,
O.P. Modi,
A.S. Mhay,
A. Chrysanthou
and
J.M. O'Sullivan
![]()
Combustion synthesis in the Mo-Si-Al ternary system. (1998)
S.B. Bhaduri,
J.G. Huang,
S. Bhaduri
and
A. Chrysanthou
Preparation of Fe-TiC composites by the thermal-explosion mode of combustion synthesis. (1997)
A. Saidi,
J.V. Wood,
J.L.F. Kellie
and
A. Chrysanthou
A study of the combustion synthesis of MoSi and MoSi-matrix composites. (1996)
A. Chrysanthou,
R.C. Jenkins,
M.J. Whiting
and
P. Tsakiropoulos
Enhancing the dispersion of TiC in copper. (1996)
A. Chrysanthou
and
G. Erbaccio
Reaction synthesis of carbide-reinforced cast iron. (1996)
A. Chrysanthou,
N.W. Davies,
J. Li,
P. Tsakiropoulos
and
O.S. Chinyamakobvu
Phase equilibria in the metal-sulfur-oxygen system and selective reduction of metal oxides and sulfides : Part I. The carbothermic reduction and calcination of complex mineral sulfides. (1996)
A. Jha,
S. Tang
and
A. Chrysanthou
![]()
Production of copper-matrix composites by in situ processing. (1995)
A. Chrysanthou
and
G. Erbaccio
Observation of intermetallic Ni3Ti whiskers during combustion synthesis reactions in the Ni-Ti-C system. (1995)
A. Chrysanthou
and
K.H. Kassim
Characteristics of the combustion synthesis of TiC and Fe-TiC composites. (1994)
A. Saidi,
A. Chrysanthou,
J.V. Wood
and
J.L.F. Kellie
Kinetic dissociation of nickel titanate and nickel tungstate in oxygen potential gradients. (1994)
D.C. Azubike,
A. Chrysanthou
and
B.S. Terry
Reduction/carburisation of columbite concentrate. (1994)
B.S. Terry,
D.C. Azubike
and
A. Chrysanthou
Carbothermic reduction of a columbite concentrate to produce cemented carbides and metal-matrix composites. (1994)
A. Chrysanthou,
D. Macfarlane
and
O.S. Chinyamakobvu
Preparation of ceramic composite powders from waste colliery minestones. (1994)
A. Chrysanthou
and
T. Sanchuan
Preparation and microstructure of AlOTiC composites by self-propagated high temperature synthesis. (1994)
A. Chrysanthou,
A. Saidi,
C.E.W. Aylott
and
J.V. Wood
In situ preparation of copper-matrix composites. (1993)
A. Chrysanthou,
G. Erbaccio
and
J.V. Wood
Simultaneous carburisation and oxidation of niobium in the presence of carbon monoxide. (1993)
A. Chrysanthou
and
P. Grieveson
The observation of metastable molybdenum carbides. (1991)
A. Chrysanthou
and
P. Grieveson
Formation of silicon carbide whiskers and their microstructure. (1991)
A. Chrysanthou,
P. Grieveson
and
A. Jha
Re-evaluation of the thermodynamic stability of calcium oxide. (1991)
A. Chrysanthou
and
P. Grieveson
The behaviour of aluminium-chromium ferritic steels in simulated coal gasification atmospheres at 723 K. (1989)
K.S. Coley,
S.R.J. Saunders
and
A. Chrysanthou
Other
The effect of setting velocity on the static and fatigue strengths of self-piercing riveted joints for automotive applications. (2014)
Dezhi Li,
Li Han,
Mike Shergold,
Geraint Williams
and
A. Chrysanthou
Effect of pulsed electric current treatment on the corrosion and strength of reinforcing steel. (2012)
L. Kruszka,
Anatolii Babutskyi,
A. Chrysanthou
and
Chu En Tan
Corrosion of structural metals treated by pulse electric current. (2010)
Anatolii Babutskyi,
A. Chrysanthou
and
John Ioannou
Process feasibility analysis of self-pierce riveting high strength low alloy steel. (2010)
L. Han,
M. Thornton,
R. Hewitt,
A. Chrysanthou
and
M. Shergold
Nanostructured TiC1-X-TiB2 Composites Obtained by Metastability Processing. (2007)
I. C. Atias Adrian,
D. Vallauri,
Z. Zhang,
A. Chrysanthou,
B. DeBenedetti
and
I. Amato
The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets. (2005)
L. Han,
K.W. Young,
R. Hewitt,
A. Chrysanthou
and
J.M. O'Sullivan
Behaviour of tantalum in the presence of CO and CO/CO mixtures at elevated temperatures. (1995)
A. Chrysanthou
and
P. Grieveson
New technologies for the reactive processing of metal-matrix composites. (1995)
A. Chrysanthou